Validating signature wuident cab 0x80096001

Due to the nature of this virus, the file has been removed from this location." Format Message,0x000000E5,"ERROR_PIPE_LOCAL","The pipe is local." Format Message,0x000000E6,"ERROR_BAD_PIPE","The pipe state is invalid." Format Message,0x000000E7,"ERROR_PIPE_BUSY","All pipe instances are busy." Format Message,0x000000E8,"ERROR_NO_DATA","The pipe is being closed." Format Message,0x000000E9,"ERROR_PIPE_NOT_CONNECTED","No process is on the other end of the pipe." Format Message,0x000000EA,"ERROR_MORE_DATA","More data is available." Format Message,0x000000F0,"ERROR_VC_DISCONNECTED","The session was canceled." Format Message,0x000000FE,"ERROR_INVALID_EA_NAME","The specified extended attribute name was invalid." Format Message,0x000000FF,"ERROR_EA_LIST_INCONSISTENT","The extended attributes are inconsistent." Format Message,0x00000102,"WAIT_TIMEOUT","The wait operation timed out." Format Message,0x00000103,"ERROR_NO_MORE_ITEMS","No more data is available." Format Message,0x0000010A,"ERROR_CANNOT_COPY","The copy functions cannot be used." Format Message,0x0000010B,"ERROR_DIRECTORY","The directory name is invalid." Format Message,0x00000113,"ERROR_EAS_DIDNT_FIT","The extended attributes did not fit in the buffer." Format Message,0x00000114,"ERROR_EA_FILE_CORRUPT","The extended attribute file on the mounted file system is corrupt." Format Message,0x00000115,"ERROR_EA_TABLE_FULL","The extended attribute table file is full." Format Message,0x00000116,"ERROR_INVALID_EA_HANDLE","The specified extended attribute handle is invalid." Format Message,0x0000011A,"ERROR_EAS_NOT_SUPPORTED","The mounted file system does not support extended attributes." Format Message,0x00000120,"ERROR_NOT_OWNER","Attempt to release mutex not owned by caller." Format Message,0x0000012A,"ERROR_TOO_MANY_POSTS","Too many posts were made to a semaphore." Format Message,0x0000012B,"ERROR_PARTIAL_COPY","Only part of a Read Process Memory or Write Process Memory request was completed." Format Message,0x0000012C,"ERROR_OPLOCK_NOT_GRANTED","The oplock request is denied." Format Message,0x0000012D,"ERROR_INVALID_OPLOCK_PROTOCOL","An invalid oplock acknowledgment was received by the system." Format Message,0x0000012E,"ERROR_DISK_TOO_FRAGMENTED","The volume is too fragmented to complete this operation." Format Message,0x0000012F,"ERROR_DELETE_PENDING","The file cannot be opened because it is in the process of being deleted." Format Message,0x00000130,"ERROR_INCOMPATIBLE_WITH_GLOBAL_SHORT_NAME_REGISTRY_SETTING","Short name settings may not be changed on this volume due to the global registry setting." Format Message,0x00000131,"ERROR_SHORT_NAMES_NOT_ENABLED_ON_VOLUME","Short names are not enabled on this volume." Format Message,0x00000132,"ERROR_SECURITY_STREAM_IS_INCONSISTENT","The security stream for the given volume is in an inconsistent state.\n Please run CHKDSK on the volume." Format Message,0x00000133,"ERROR_INVALID_LOCK_RANGE","A requested file lock operation cannot be processed due to an invalid byte range." Format Message,0x00000134,"ERROR_IMAGE_SUBSYSTEM_NOT_PRESENT","The subsystem needed to support the image type is not present." Format Message,0x00000135,"ERROR_NOTIFICATION_GUID_ALREADY_DEFINED","The specified file already has a notification GUID associated with it." Format Message,0x0000013D,"ERROR_MR_MID_NOT_FOUND","The system cannot find message text for message number 0x%1 in the message file for %2." Format Message,0x0000013E,"ERROR_SCOPE_NOT_FOUND","The scope specified was not found." Format Message,0x0000015E,"ERROR_FAIL_NOACTION_REBOOT","No action was taken as a system reboot is required." Format Message,0x0000015F,"ERROR_FAIL_SHUTDOWN","The shutdown operation failed." Format Message,0x00000160,"ERROR_FAIL_RESTART","The restart operation failed." Format Message,0x00000161,"ERROR_MAX_SESSIONS_REACHED","The maximum number of sessions has been reached." Format Message,0x00000190,"ERROR_THREAD_MODE_ALREADY_BACKGROUND","The thread is already in background processing mode." Format Message,0x00000191,"ERROR_THREAD_MODE_NOT_BACKGROUND","The thread is not in background processing mode." Format Message,0x00000192,"ERROR_PROCESS_MODE_ALREADY_BACKGROUND","The process is already in background processing mode." Format Message,0x00000193,"ERROR_PROCESS_MODE_NOT_BACKGROUND","The process is not in background processing mode." Format Message,0x000001E7,"ERROR_INVALID_ADDRESS","Attempt to access invalid address." Format Message,0x000001F4,"ERROR_USER_PROFILE_LOAD","User profile cannot be loaded." Format Message,0x00000216,"ERROR_ARITHMETIC_OVERFLOW","Arithmetic result exceeded 32 bits." Format Message,0x00000217,"ERROR_PIPE_CONNECTED","There is a process on other end of the pipe." Format Message,0x00000218,"ERROR_PIPE_LISTENING","Waiting for a process to open the other end of the pipe." Format Message,0x00000219,"ERROR_VERIFIER_STOP","Application verifier has found an error in the current process." Format Message,0x0000021A,"ERROR_ABIOS_ERROR","An error occurred in the ABIOS subsystem." Format Message,0x0000021B,"ERROR_WX86_WARNING","A warning occurred in the WX86 subsystem." Format Message,0x0000021C,"ERROR_WX86_ERROR","An error occurred in the WX86 subsystem." Format Message,0x0000021D,"ERROR_TIMER_NOT_CANCELED","An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine." Format Message,0x0000021E,"ERROR_UNWIND","Unwind exception code." Format Message,0x0000021F,"ERROR_BAD_STACK","An invalid or unaligned stack was encountered during an unwind operation." Format Message,0x00000220,"ERROR_INVALID_UNWIND_TARGET","An invalid unwind target was encountered during an unwind operation." Format Message,0x00000221,"ERROR_INVALID_PORT_ATTRIBUTES","Invalid Object Attributes specified to Nt Create Port or invalid Port Attributes specified to Nt Connect Port" Format Message,0x00000222,"ERROR_PORT_MESSAGE_TOO_LONG","Length of message passed to Nt Request Port or Nt Request Wait Reply Port was longer than the maximum message allowed by the port." Format Message,0x00000223,"ERROR_INVALID_QUOTA_LOWER","An attempt was made to lower a quota limit below the current usage." Format Message,0x00000224,"ERROR_DEVICE_ALREADY_ATTACHED","An attempt was made to attach to a device that was already attached to another device." Format Message,0x00000225,"ERROR_INSTRUCTION_MISALIGNMENT","An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references." Format Message,0x00000226,"ERROR_PROFILING_NOT_STARTED","Profiling not started." Format Message,0x00000227,"ERROR_PROFILING_NOT_STOPPED","Profiling not stopped." Format Message,0x00000228,"ERROR_COULD_NOT_INTERPRET","The passed ACL did not contain the minimum required information." Format Message,0x00000229,"ERROR_PROFILING_AT_LIMIT","The number of active profiling objects is at the maximum and no more may be started." Format Message,0x0000022A,"ERROR_CANT_WAIT","Used to indicate that an operation cannot continue without blocking for I/O." Format Message,0x0000022B,"ERROR_CANT_TERMINATE_SELF","Indicates that a thread attempted to terminate itself by default (called Nt Terminate Thread with NULL) and it was the last thread in the current process." Format Message,0x0000022C,"ERROR_UNEXPECTED_MM_CREATE_ERR","If an MM error is returned which is not defined in the standard Fs Rtl filter, it is converted to one of the following errors which is guaranteed to be in the filter.\n In this case information is lost, however, the filter correctly handles the exception." Format Message,0x0000022D,"ERROR_UNEXPECTED_MM_MAP_ERROR","If an MM error is returned which is not defined in the standard Fs Rtl filter, it is converted to one of the following errors which is guaranteed to be in the filter.\n In this case information is lost, however, the filter correctly handles the exception." Format Message,0x0000022E,"ERROR_UNEXPECTED_MM_EXTEND_ERR","If an MM error is returned which is not defined in the standard Fs Rtl filter, it is converted to one of the following errors which is guaranteed to be in the filter.\n In this case information is lost, however, the filter correctly handles the exception." Format Message,0x0000022F,"ERROR_BAD_FUNCTION_TABLE","A malformed function table was encountered during an unwind operation." Format Message,0x00000230,"ERROR_NO_GUID_TRANSLATION","Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system.\n This causes the protection attempt to fail, which may cause a file creation attempt to fail." Format Message,0x00000231,"ERROR_INVALID_LDT_SIZE","Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors." Format Message,0x00000233,"ERROR_INVALID_LDT_OFFSET","Indicates that the starting value for the LDT information was not an integral multiple of the selector size." Format Message,0x00000234,"ERROR_INVALID_LDT_DESCRIPTOR","Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors." Format Message,0x00000235,"ERROR_TOO_MANY_THREADS","Indicates a process has too many threads to perform the requested action.2008-01-31 :018 1124 7ac Report *********** Report: Initializing static reporting data *********** 2008-01-31 :018 1124 7ac Report * OS Version = 5.1.2600.2.0.65792 2008-01-31 :081 1124 7ac Report * Computer Brand = Dell Inc.The computer runs Windows Update fine while its not joined to the domain.However, once I join it to the domain it cannot perform windows update.I get the following error code Validating signature for C:\WINDOWS\Software Distribution\Self Update\wuident.cab: Microsoft signed: Yes Infrastructure signed: No WARNING: Digital Signatures on file C:\WINDOWS\Software Distribution\Self Update\are not trusted: Error 0x800b0001 WARNING: Self Update check failed to download package information, error = 0x800B0001 FATAL: Self Update check failed, err = 0x800B0001 WARNING: Skipping scan, self-update check returned 0x800B0001 WARNING: Exit code = 0x800B0001 After you joined the Domain, can it still list the updates with the KB hotlinks for manual download or does it fail to even get that far?I'm not asking just to hint that I know your answer, this is for myself to help me and others avoid the time consuming precaution of imaging my box, joining a domain just to realize there is no more way to even dowload the fixes that I'm willing to individually click and load or if Windows UPdate is just ruined until I restore my image.Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

2- Delete the Sus Client Id and Sus Client Id Validation values. 4- After the reboot, go to the DOS command line and type: 5- "wuauclt /Reset Authorization /Detect Now" 6- "wuauclt /Test WSUSServer" Result: Still same error.

2008-01-31 :081 1124 7ac Report * Computer Model = Opti Plex 745 2008-01-31 :097 1124 7ac Report * Bios Revision = 2.4.1 2008-01-31 :097 1124 7ac Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 2.4.1 2008-01-31 :097 1124 7ac Report * Bios Release Date = 2007-08-21T 2008-01-31 :097 1124 7ac Report * Locale ID = 1033 2008-01-31 :235 1124 60c AU Triggering AU detection through Detect Now API 2008-01-31 :235 1124 60c AU Triggering Online detection (non-interactive) 2008-01-31 :235 1124 7ac AU ############# 2008-01-31 :235 1124 7ac AU ## START ## AU: Search for updates 2008-01-31 :235 1124 7ac AU ######### 2008-01-31 :267 1124 7ac AU ## RESUMED ## AU: Search for updates [Call Id = ] 2008-01-31 :598 1124 cfc AU # WARNING: Search callback failed, result = 0x80092026 2008-01-31 :598 1124 cfc AU # WARNING: Failed to find updates with error code 80092026 2008-01-31 :598 1124 cfc AU ######### 2008-01-31 :598 1124 cfc AU ## END ## AU: Search for updates [Call Id = ] 2008-01-31 :598 1124 cfc AU ############# 2008-01-31 :598 1124 cfc AU AU setting next detection timeout to 2008-01-31 2008-01-31 :598 1124 cfc AU Setting AU scheduled install time to 2008-02-01 2008-01-31 :580 1124 b94 Report REPORT EVENT: 2008-01-31 :503-0500 1 148 101 0 80092026 Self Update Failure Software Synchronization Windows Update Client failed to detect with error 0x80092026.

2008-01-31 :346 1124 b94 PT Initializing simple targeting cookie, client Id = c2e7a2db-9349-4fc8-a3ac-f3b9f69e0b37, target group = , DNS name = mwinn.2008-01-31 :346 1124 b94 PT Server URL = Auth Web Service/Simple 2008-01-31 :378 1124 b94 PT WARNING: Get Cookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200 2008-01-31 :378 1124 b94 PT WARNING: SOAP Fault: 0x00012c 2008-01-31 :378 1124 b94 PT WARNING: faultstring: Fault occurred 2008-01-31 :378 1124 b94 PT WARNING: Error Code: Server Changed(4) 2008-01-31 :378 1124 b94 PT WARNING: Message: Server rolled back since last call to Get Cookie 2008-01-31 :378 1124 b94 PT WARNING: Method:" Distribution/Server/Client Web Service/Get Cookie" 2008-01-31 :378 1124 b94 PT WARNING: ID:50b993a7-3896-4f11-807b-e11613257747 2008-01-31 :378 1124 b94 PT WARNING: PTError: 0x80244015 2008-01-31 :378 1124 b94 PT WARNING: Get Cookie_With Recovery failed : 0x80244015 2008-01-31 :378 1124 b94 PT WARNING: Refresh Cookie failed: 0x80244015 2008-01-31 :378 1124 b94 PT WARNING: Refresh PTState failed: 0x80244015 2008-01-31 :833 1124 b94 PT WARNING: Cached cookie has expired or new PID is available 2008-01-31 :833 1124 b94 PT Initializing simple targeting cookie, client Id = c2e7a2db-9349-4fc8-a3ac-f3b9f69e0b37, target group = , DNS name = mwinn.2008-01-31 :833 1124 b94 PT Server URL = Auth Web Service/Simple 2008-01-31 :137 1124 b94 Report Uploading 1 events using cached cookie, reporting URL = Web Service/Reporting Web Here are the things that I have tried: At a command prompt run regsvr32 /u At a command prompt run regsvr32 At a command prompt run net start wuauserv At a command prompt run /resetauthorization /detectnow Result: Still same error.

Copy the text below into a text file, then save it as a file and execute it, this will reset Windows Update.

Be sure the text below is in a text file as separate lines as shown.

Leave a Reply

  1. Free trial chat lines teenage girls 22-Mar-2020 12:43

    TP-ing the neighborhood or shoplifting may have landed them a slap on the wrist last week, but that is no longer the case.